12Automatic dialing on the portable handsetStoring names and telephonenumbers in the phonebookMaking a voice call using thephonebook2 Press (Register). “XXX” shows the remainingstation numbers you can store. You can program up to 150stations, including 4 pre-programmed stations.1 Press (Phonebook).3 Enter the name, up to 20 characters (see the table onpage 9 for instructions).4 Press (Register) twice.3 Press (Talk) or press (Speakerphone).5 Enter the telephone number, up to 24 digits. To correct a mistake, press (Clear).6 Press (Register).7 If necessary, enter the group number (1–9).8 Press (Register). To program other items, repeat steps 3 to 8.9 Press (Off) to exit the program.Editing a stored name or number3 Press (Edit).4 Edit the name (see the table on page 9 forinstructions), then press (Register). If you do not need to edit the name, press(Register) and skip to step 5.5 Enter the correct kana, then press (Register). If you do not need to edit the kana, press(Register) and skip to step 6.6 Enter the correct telephone number. If you do not need to edit the telephone number,skip to step 7.8 If necessary, enter the correct group number.9 Press (Register).7 Press (Register).1 Press (Phonebook).2 Press (Search button) repeatedly until thedesired name is displayed.2 Press (Search button) repeatedly until thedesired name is displayed.1 Press (Phonebook).10 Press (Off) to exit the program.