Panasonic KX-NT700 Operating Instructions Manual

Also see for VoiceSonic KX-NT700: Specifications Quick reference guide Quick reference guide Operating instructions Operating instructions

Contents

Panasonic KX-NT700 Operating Instructions Manual Manual pdf 25 page image

Changing the Language1. Press [MENU].2. Press [ ] or [ ] repeatedly to select "BasicSettings".3. Press [ENTER] two times.4. Press [ ] or [ ] repeatedly to select the desiredlanguage.5. Press [ENTER], then press [MENU].Setting the Date & TimeSet the unit's date and time setting before using the unit.The date and time are shown on the display in standbymode, and are displayed when playing conversationsthat were recorded to an SD memory card.1. Press [MENU].2. Select "Basic Settings", then pressSELECT .3. Select "Date & Time", then pressSELECT .4. Using the keypad, enter 2 digits each for the year,month, day of the month, hour (24-hour format), andminute.Example: To enter "Jan. 23, 2008, 7:45 PM", press[0801231945].• If you make a mistake, press to movethe cursor as needed, then enter the correctnumber.5. PressSAVE .6. Press [MENU].Note• You can select 12-hour or 24-hour time display(see page 53).• The date format varies by the selection madefor the "Language" setting. See page 52 fordetails.TEL Line SettingsSelecting the Available LinesTo use the TEL line, the "Line Selection" settingmust be set to "IP + TEL". (This is the default setting.)1. Press [MENU].2. PressLINE .3. Select "IP + TEL".• When "Line Selection" is set to "IP +PC" or "IP + PS", TEL calls cannot be made orreceived.4. PressSAVE .5. Press [MENU].Setting the Dial ModeSet the dial mode to "Pulse" if the TEL line does notsupport tone dialling.1. Press [MENU].2. Select "TEL Settings", then pressSELECT .3. Select "Dial Mode", then pressSELECT .4. Select "Pulse" or "Tone".5. PressSAVE .6. Press [MENU].Document Version 2010/02 Operating Instructions 25Preparation