Windows1LPR port printing with TCP/IP is only explained in thisguide. For other settings and detailed information, see“Network” section in the Operating Instructions. (Seebelow.)n Reading the Operating InstructionsThe Operating Instructions are installed in yourcomputer after installing the printer driver. Beforeinstalling the printer driver, you can also read theOperating Instructions on the printer CD-ROM asfollows:(1) Insert the printer CD-ROM into your computer CD-ROM drive.(2) Double click the Network.pdf in the Manual folderon the printer CD-ROM.• To open and read the Operating Instructions on yourscreen, Acrobat Reader program must be installed inthe computer. To install it, double click theAr405eng.exe*2 .*1Microsoft® Windows® operating system (hereafterWindows)*2 File name of Acrobat Reader may differ depending on theversion.• Microsoft, Windows and Windows NT are either registeredtrademarks or trademarks of Microsoft Corporation in theUnited States and/or other countries.• AppleTalk, LaserWriter, Mac and Macintosh aretrademarks of Apple Computer, Inc.• Adobe, the Adobe logo, Acrobat, and the Acrobat logo aretrademarks of Adobe Systems Incorporated.• All other acknowledgments are trademarks or registeredtrademarks of their respective holders.Acrobat® Reader copyright © 1987-1999 Adobe SystemsIncorporated. All rights reserved.The instructions are subject to change without notice.© Kyushu Matsushita Electric Co., Ltd. 2001n Step 1: Setting up TCP/IP on theComputerIf the TCP/IP of your computer is already set, proceedto the next step. If it is not set, consult with yournetwork administrator. Regarding the configuration ofTCP/IP, refer to the help menu or documentation forWindows.n Step 2: Setting up TCP/IP of the PrinterYou may need to contact your network administrator toset up the TCP/IP.1 Press PRINT/RESET button on the printerpanel less than 5 seconds to print theconfiguration page.2 Confirm the MAC address on the configurationpage.3 Insert the printer CD-ROM into the CD-ROMdrive.The CD-ROM launches automatically.Note:• If the CD-ROM does not launch automatically,perform the following procedures.(1)Double click My computer icon.(2)Double click the CD-ROM icon.*1Microsoft® Windows® 95 operating system(hereafter Windows 95)*2Microsoft® Windows® 98 operating system(hereafter Windows 98)*3Microsoft® Windows® Millennium Edition operatingsystem (hereafter Windows Me)Laser PrinterNetwork Setup GuideModel No. KX-P7110KX-P7110 comes standard with an Ethernet networkdevice. First read the Setup Guide for basic setupprocedures and necessary precautions for safety anduse. Then perform the network setup following thisguide when the printer is connected to the network.For the detailed information, see the “Network” sectionin the Operating Instructions.Keep this documentation in a safe place for futurereference.Table of ContentsSetup for Network Print(For Windows). . . . . . . . . . . . . . . . . . . . 1LPR Port Printing in Windows 95 /Windows 98 / Windows Me . . . . . . . . . . . . . . 1LPR Port Printing inWindows NT 4.0 / Windows 2000 . . . . . . . . . 3Installing the Web Administrative Tool . . . . . . . 4Setup for Network Print (For Mac). . . . . 4Setup for Network Print(For Windows®*1 )LPR Port Printing in Windows 95*1/Windows 98*2 / Windows Me*3