Customising Your Phone & System248 User Manual4.3.6 Caller ID Dial Set (006)You can set the identification code of the calling party (Caller ID Code) to utilise Caller ID Serviceprovided by a specific Central Office (CO). If an ID Code transmitted from CO is found in the CallerID Code Table, the Caller's ID Code or a name given to the code in "4.3.7 Caller ID Name Set (007)"is displayed on the display PT, allowing the called party to recognise the caller.Default: All locations: Not Stored• Up to 1000 Caller ID Codes (a maximum of 24 digits for each consisting of 0-9, or #) pertenant, 2000 per system can be assigned.• Programme "4.3.7 Caller ID Name Set (007)" is used to give names to Caller ID Codes.If an ID Code is given a name, the called party's display PT shows the name with the CallerID Code.Press NEXT.Dial 006.NEXTPress STORE.Enter locationnumber (000-999).Enter Caller ID number(max. 24 digits).STOREPress END.ENDlocation no. Caller ID no.SELECTPREVNEXTPress SELECT.Press NEXT. Press PREV.ORTo continueTo end0 0 6
