Operations 1-71.2 Proprietary Telephone SettingsBasic OperationsO PERATION• 1.5 During a Conversation, “Call Waiting”• 2.1 Tone / Ring Tone ListProprietary Telephone Setting Data Default SetAllows you to reset the proprietary telephone settings at an extension to the default settings.• Preferred Line Assignment — Outgoing (default: No Line Preference)• Preferred Line Assignment — Incoming (default: Ringing Line)• Outside (CO) Line Ringing Selection (default: Ring – all outside (CO) lines)• Intercom Alert Assignment (default: Tone Call)• Call Waiting Tone Selection (default: Tone 1)Call Waiting Tone SelectionYou can select the call waiting tone, either Tone 1 (default) or Tone 2.SELECTION PROGRAMMING I NPUTq Tone 1q Tone 2AUTO DIALSTORE#5 1AUTO DIALSTORE5 2AUTO DIALSTORE+Intercom Alert AssignmentThe intercom alert (tone/voice) at a receiving extension can be selected by programming.Voice Call: A Voice alert instead of Tone alert is heard through the speaker on thereceiving extension.Tone Call (default): A tone alert (ringing) sounds at the receiving extension.SELECTION PROGRAMMING I NPUT4 2AUTO DIALSTORE4 1AUTO DIALSTOREq Tone Call(Cancels the Voice Call.)q Voice Call• This feature also cancels the Handsfree Answerback feature and pressing theAUTO ANSWER/MUTE button in the Room Monitor feature.!!
