Panasonic KX-TA624 Installation Manual

Also see for KX-TA624: User guide Feature manual Programming manual User guide Manual

Contents

Panasonic KX-TA624 Installation Manual Manual pdf 222 page image

4.1.4 Programming Example4-8 System ProgrammingSample of Description Explanation(1) Program address: This address is printed at the top ofevery page to quickly find the desired program.(2) Mode title.(3) Program title.(4) Provides a more detailed description of the program.(5) Shows the user the assignable choices.(6) Shows the user the factory default setting.(7) Shows the user programming procedures step by step.• During programming, use the overlay.• Before starting to program, enter the programmingmode. (See “Entering the programming mode” onpage 4-4.)(8) Enter the program address.(9) The display shows the program title.(10) Press NEXT shown on the overlay.(11) The display asks the user to enter a speed dialingnumber.(12) If the telephone number has already been stored, thenumber is displayed.(13) Enter the telephone number that the user wants to store.The entry will be displayed as the user enters the digits.(14) Pressing CLEAR erases the whole entry.(15) The entry is now stored.The indicator lights red and a confirmation tone lets theuser know that storing is completed.(16) Select the best way for the user to store another speeddialing number. Pressing NEXT/PREV allows the userto select the next higher/lower speed dialing number.The user can also continue pressing a button until thedesired entry is displayed. If the user presses SELECTand the desired speed dialing number, the selected codewill be displayed.(17) The user can continue programming another entry.(18) After all the entries have been stored, complete thisprogram by pressing END. After pressing END, theuser can go to any desired program address. The usercan return to the initial system programming messagemode at any time by pressing END.(19) Tells the user what should be noted or considered whendoing the program.(20) Lists all of the features related to the program. Thesefeatures are described in Section 3.The following programming instructions assume that the user hasalready entered the programming mode.Example: Program [001] “System Speed Dialing Entry”Description (4) Used to program the System SpeedDialing numbers. These numbers areavailable to all extension users. Thereare 100 numbers available from 00 to 99.Selection (5) • Speed dialing number: 00 – 99• Telephone number: 32 digits (max.)Default (6) All speed dialing numbers – Not storedProgramming (7) 1. Enter 001. (8)Display: Speed Dialing (9)2. Press NEXT. (10)Display: Speed NO? → (11)3. Enter a speed dialing number.Pressing NEXT also can enter speeddialing number 00.Display example:00:Not Stored (12)4. Enter a telephone number. (13)To delete the current entry, pressCLEAR. (14)To change the current entry, pressCLEAR and enter the new number.5. Press STORE. (15)6. To program another speed dialingnumber, press NEXT or PREV, orSELECT and enter the desiredspeed dialing number. (16)7. Repeat steps 4 through 6. (17)8. Press END. (18)Conditions (19) • Each speed dialing number has amaximum of 32 digits. The validcharacters are 0 – 9, , and # keys,and the FLASH, PAUSE, SECRETand – (hyphen) buttons.•••••Feature Reference (20) Section 3, FeaturesSystem Speed Dialing4.2 System Programming (2)System Speed Dialing Entry (3)001 (1)