4-50 System Programming[414]-[416] 4.2 System ProgrammingSelects the mode of an incoming outside call on each exchange Line in the day, night andlunch modes. There are the following 5 modes.Normal: An incoming outside call will be received at the extension(s) assigned inprograms [408]–[410] “Flexible Ringing Assignment — Day/Night/Lunch”.DIL: An incoming outside call will be received at the assigned extension in thisprogram.DISA1: An incoming outside call will be received at an extension through the DISAfeature. A caller will hear a tone or an outgoing message.DISA2: An incoming outside call will be received at an extension through the DISAfeature. A caller might hear OGM 2; for various configurations please see Cases2, 3 and 4 in Section 3, Features “Outgoing Message (OGM).UCD: An incoming outside call will be received at an extension through the UCDfeature.X – Program address selection number: 14 ([414] for day) / 15 ([415] for night)/16 ([416] for lunch)*1 Exchange Line number: 1 through 6 / (All exchange lines)*2 Extension port number: 01 through 24 / (All extension ports)Default All exchange lines – NormalSELECT(Normal/DIL/DISA1/DISA2/UCD)[414]-[416] Exchange Line Mode —Day/Night/LunchX4 ENDSELECTexchange line no.*1(14···16) (Normal/DIL/DISA1/DISA2/UCD)< To select Normal,DISA or UCD >NEXTSELECTX4(14··· 16)ENDSELECTexchange line no.*1 extension port no.*2NEXT< To select DIL >(1 ··· 6/ )(1 ··· 6/ ) (01···24/ )NEXT PREVorTo continueNEXT PREVorTo continueSTORETo continueSTORETo continue
