9.9 Caller ID [9]Programming Manual 221DefaultOffValue RangeOn (checked), Off (unchecked)Programming Manual References[907] Caller ID SMDR PrintoutFeature Manual References1.1.30 Caller ID1.1.112 Station Message Detail Recording (SMDR)Call Waiting Caller ID TimeSelects the length of time that the Call Waiting Caller ID feature sent from the telephone company is shownon the display of the proprietary telephone (PT). The TRANSFER button, HOLD button, and CONF buttondo not function during the assigned time.Default30 sValue Range10 s, 20 s, 30 s, 40 s, 60 s, 120 sProgramming Manual References[908] Call Waiting Caller ID TimeFeature Manual References1.1.28 Call Waiting Caller IDCall Waiting Caller ID CAS Receive TimeThis program is available when the Caller ID and Call Waiting Caller ID features are enabled in CO LineSettings—Caller ID and CO Line Settings—Call Waiting Caller ID respectively on this screen.If the extension user has a Call Waiting Caller ID during a conversation, the telephone company will sendan alert tone (CAS) to the PBX. If the CAS duration is too long or too short, the CAS is ignored by the PBX.If the CAS is accepted, then the PBX will respond and the Call Waiting Caller ID feature will be performed.This program assigns the allowable CAS duration. Normally, it should not be necessary to change thedefault setting.Default72–96 msValue Range40–120 ms, 64–96 ms, 72–96 ms
