Panasonic KX-TA824 User Manual

Also see for KX-TA824: User guide User guide Operating manual Installation manual Programming manual

Contents

Location of Controls1 PROGRAM: Used to enter and exit theprogramming mode.2 CONF (Conference): Used to establish amultiple party conversation.3 INTERCOM: Used to make or receiveintercom calls.4 FWD/DND (Call Forwarding/Do NotDisturb): Used to perform Call Forwardingor Do Not Disturb.5 FLASH/RECALL: Used for External FeatureAccess or to disconnect the current call andmake another call without hanging up.6 AUTO ANS (Auto Answer)(Other than KX-T7750): Used to answer anincoming call in the hands-free mode.MUTE (Other than KX-T7750): Used tomute the microphone during a conversation.VOICE CALL (KX-T7750 only): Used toreceive a notification via monitor in place ofringing.7 AUTO DIAL/STORE: Used for speeddialing or storing program changes.8 REDIAL: Used to redial.9 DIALING BUTTONS WITH BACKLIGHT(KX-T7731/7736/7737): Dialing buttons arebacklit (1) when you receive a call, (2) duringa conversation, (3) when BGM is activated atyour phone, or (4) when you press any button.1011TRANSFER: Used to transfer a call toanother party.HOLD: Used to place a call on hold.12 SP-PHONE (Other than KX-T7750): Usedfor the hands-free operation.MONITOR (KX-T7750 only): Used forhands-free dialing. You can monitor theother party's voice hands-free.13 NAVIGATOR KEY(KX-T7730/7731/7735/7736/7737):Used to adjust the volume and the displaycontrast, or select desired items.VOLUME KEY (KX-T7720/7750): Used toadjust the volume.14 Programmable Feature (PF) Button:Used as a One-touch Dialing button.(Button assignment is required.)15 Flexible Outside (CO) Line Button:Used to make or answer an outside call.Pressing this button seizes an idle outsideline automatically. (Button assignment isrequired.) Also used as a feature button.(Button assignment is required.)1617PAUSE: Used to insert a pause duringdialing.MESSAGE: Used to leave a messagewaiting indication, or call back the partywho left the message waiting indication.18 Message/Ringer Lamp: The Message/Ringer lamp informs you visually that youhave a message or a call.When you receive a call, the lampflashes depending on the ringing pattern.When the ringing pattern is set to Single(Slow flash), Double (Moderate flash), orTriple (Rapid flash) in your PBX, the lampflashes accordingly. When any of theother ringing patterns are set in yourPBX, the lamp may not flash. (e.g., S-Double, Call Waiting Tone1.)When someone has left you a message,the lamp is lit continuously.– 9 –

/ 12

Related manuals for Panasonic KX-TA824