SettingsSelecting the Dialing ModeYou can programthe dialing mode using the handset near the base unit.If you have touch tone service, set to "Tone". If rotary or pulse service isused, set to "Pulse". Your phone comes from the factory set to "Tone".The TALK and DIGITAL SP-PHONE indicator lights must be off beforeprogramming.Press _ROGRAM].• The TALK indicator flashes.Press SEARCH _ (Next key) repeatedlyuntil "Set dial mode ?" is displayed.Press SEARCH [] (Yes key).Save AUTO# ?v=Next ^=YesSet dial mode ?]iv=Next ^=YesDial modev=Tone ^=Puls_Dial modePulseTo select "Pulse", press SEARCH [].ORTo select 'q'one", press SEARCH [_.• A long beep sounds.• The handset willreturn to the stand-bymode. Dial mode ITone• To cancel during programming, press _ or PIP'R-OGRAM].Start againfrom step 1.• If 3 beeps sound and the display shows "Saree.error", move closertothe base unitand try again. If "Save error" is stilldisplayed, place thehandset on the base unit. Start again from step 1.If a power failure occurs the mode will return tothe rectorypre_t (T0,_iiReprogram if necessary,16
