Panasonic KX-TC1851B Operating Instructions Manual

Also see for KX-TC1851B - 900 MHz DSS Cordless Phone: Operating instructions

Contents

– 7 –Selecting the Dialing ModeYou can program the dialing mode by using the handset near the base unit.If you have touch tone service, set to TONE. If rotary or pulse service is used,set to PULSE. Your phone comes from the factory set to TONE.Make sure that the handset is in the stand-by mode.1 Press (FUNCTION/EXIT).2 Press (›) or (‹) repeatedly until the arrow points to “Program”.3 Press (ENTER/CH) or FWD/EDIT (fl).4 Press (›) or (‹) repeatedly until the arrow points to “Set dial mode”.5 Press (ENTER/CH) or FWD/EDIT (fl).6 Press (›) or (‹) to select “Pulse” or “Tone”. Press (ENTER/CH).≥A beep sounds.≥The display will return to the function list. To return to the stand-by mode,press (FUNCTION/EXIT) or wait for 60 seconds.≥You can exit the programming mode any time by pressing (FUNCTION/EXIT).