Panasonic KX-TCD705RUM Service Manual

15.2. Introduction15 EEPROM LAYOUT (HANDSET)15.1. ScopeThe purpose of this section is to describe the layout of the EEPROM (IC2) TCD115 handset.The EEPROM contains hardware, software, and user specific parameters. Some parameters are set during production of thehandset e.g. crystal oscillator adjustment at 0000..01, some are set by the user when configuring the handset e.g. ringer volumeat 0F38, and some during normal use of the phone e.g. redial memory at 0311..0392.The handset uses a 32k bit (4096 x 8) serial EEPROM (IC9) for storing volatile parameters. All parameters are set up beforethe handset the factory. Some of these are vital for the operation of the hardware so a set of default parameters is programmedbefore the actual hardware fine-tuning can be initiated. This document lists all default settings with a short description.This document lists all default parameters with a short description.In the tables below values in a range that are similar are not repeated; i.e. Address 00 to 01 contains the value 00 simply meansthat the value 00 is repeated in all addressee in the range.Type Name DescriptionD default The EEPROM location is preset to the Default value by the eeprom default loader.A adjust The EEPROM location is set during the production test and should not be overwritten. The value isset by the eeprom default loader only if the location contains 0xFF, i, e. it has never been set.- EEPROM location which is not set at all.15.3. EEPROM contents15.3.1. General SetupAddress Default Name Type Description00-01 ?? ?? EepromOscillator D Frequency adjustment..........0002 20 ModulationDeviation A Mudulation adjustment0030-0034 00 .. 00 IPEI A IPEI0036-003A ?? .. ?? PARK_1 - PARK for registration 1003B-003F ?? .. ?? PARK_2 - PARK for registration 20040-0044 ?? .. ?? PARK_3 - PARK for registration 30045-0049 ?? .. ?? PARK_4 - PARK for registration 4004A FF PLI_1 D Pli for registration 1. If set to FF the registration isdeleted.004B FF PLI_2 D Pli for registration 2. If set to FF the registration isdeleted.004C FF PLI_3 D Pli for registration 3. If set to FF the registration isdeleted.004D FF PLI_4 D Pli for registration 4. If set to FF the registration isdeleted.0100-0104 ?? .. ?? RFPI_1 - RFPI for registration 10105 ?? SerClass_1 - Service class for registration 10106 ?? LAL_1 - Location area level for registration 10107 ?? IPUI_LEN_1 - IPUI length for registration 10108-0114 ?? .. ?? IPUI_1 - IPUI for registration 10115 ?? ZAP_1 - ZAP for registration 10116 ?? STATUS_1 - Status for registration 10117-0126 ?? .. ?? UAK_1 - UAK for registration 10127-012F ?? .. ?? Reserved - Protocol data0130-0134 ?? .. ?? RFPI_2 - RFPI for registration 20135 ?? SerClass_2 - Service class for registration 20136 ?? LAL_2 - Location area level for registration 20137 ?? IPUI_LEN_2 - IPUI length for registration 20138-0144 ?? .. ?? IPUI_2 - IPUI for registration 20145 ?? ZAP_2 - ZAP for registration 20146 ?? STATUS_2 - Status for registration 20147-0156 ?? .. ?? UAK_2 - UAK for registration 20157-015F ?? .. ?? Reserved - Protocol data0160-0164 ?? .. ?? RFPI_3 - RFPI for registration 30165 ?? SerClass_3 - Service class for registration 30166 ?? LAL_3 - Location area level for registration 30167 ?? IPUI_LEN_3 - IPUI length for registration 30168-0174 ?? .. ?? IPUI_3 - IPUI for registration 362KX-TCD705RUM / KX-TCD705RUS