2.2 System ProgrammingGeneral Programming 79[106] Station Hunting TypeDescriptionUsed to enable or disable hunting and set the Station Hunting type for each hunting group.There are six Station Hunting types available: Circular, Uniform Call Distribution (UCD),Voice Mail (VM), Automated Attendant (AA), Ring, and No Reply. If circular hunting isassigned for a group, all of the extensions in the group are hunted until an idle one is found. IfVM hunting is assigned, all of the VM ports of an extension group are hunted until an idle oneis found to allow Voice Mail Service. If AA hunting is assigned, all of the AA ports of anextension group are hunted until an idle one is found to allow AA Service. If UCD is assigned,group members are hunted in circular way, starting at the extension following the last onecalled. If Ring hunting is assigned, all of the extensions in the group ring simultaneously. If NoReply hunting is assigned, the extensions in the group are hunted in order of registration for aprogrammed interval of time.Selection• Hunting group number: 01 through 32• Disable (no hunting) / Circular / VM(Voice Mail) / AA(automated attendant) / UCD /RING / No ReplyDefaultAll hunting groups – DisableProgramming1. Enter 106.Display: Hunt Type2. Press NEXT.Display: Group No?3. Enter a hunting group number.To enter hunting group number 01, you can also press NEXT.Display example: 01:Disable4. Keep pressing SELECT until the desired selection is displayed.5. Press STORE.6. To programme another hunting group, press NEXT or PREV, or SELECT and the desiredhunting group number.7. Repeat steps 4 through 6.8. Press END.
