4.3 Traffic Information236 Utility4.3 Traffic Information4.3.1 Traffic InformationYou can display the traffic information on your Maintenance Console PC by downloading thetraffic data measured at KX-TD500 System.Traffic Menu consists of the following six submenus.• 4.3.2 Station• 4.3.3 Trunk Group• 4.3.4 Operator• 4.3.5 UCD (Uniform Call Distribution)• 4.3.6 OGM• 4.3.7 AGCIf you select "Traffic Information" in the "Utility" drop-down menu, "Traffic Measurement"screen is displayed. The current status of traffic measurement is displayed on the top of thisscreen. There are "Start," "Stop" and "View" buttons, which control measurement, dependingon under the condition of traffic measurement. The details of each item are as follows.Traffic Measurement StatusStart traffic measurementInterrupt Traffic MeasurementView Traffic DataOperation1. Point to "Utility" in the Main Menu and click.• The "Utility"drop-down menu is displayed.2. Click "Traffic Information."• Now Idling The system is not in the measurement mode at present.• Now measuring The system is in the measurement mode now.• "Start" button The traffic measurement begins.This button is available only when the TrafficMeasurement is idle.• "Stop" button The traffic measurement stops.This button is available only when the system ismeasuring the traffic.• "View" button "Traffic Information" screen is displayed.
