Customising Your Phone & SystemUser Manual 1994.1.2 Initial SettingsThe original settings are shown in bold letters in the shaded boxes. Find and mark your desiredselections for programming.• If nothing is entered within 1 minute in the programming mode, the mode returns to thenormal status.• To exit the mode at any time, lift the handset.Pressing the One-TouchDialling button.Which line do you prefer toseize when you go off-hookto make calls?(Preferred Line Assignment- Outgoing)To continueTo exitTo programTo enter the programme modeprogramminginputDial 99. Press STORE.Follow programminginput.Press PROGRAM. Press PROGRAM.Item Selection Programming InputNo lineAn idle outside lineA pre-assigned outside lineNo lineWhich line do you prefer toseize when you go off-hookto receive calls?(Preferred Line Assignment- Incoming) A pre-assigned outside lineA ringing lineThe Intercom lineWhich way do you prefer todial the One-Touch Diallingfeature?(Full One-Touch DiallingAssignment)Going Off-hook and then pressingthe One-Touch Dialling button.(1-4)CO port no.(1-4)CO port no.AUTO DIALSTOREPROGRAMPROGRAMINTERCOM9911 1111 1211 131112 1112 1212 1313 1113 12
