Location of ControlsLCD (Liquid Crystal Display)Microphone: Used for the hands-freeconversation.VOLUME Control Button: Used toadjust the volume.HOLD: Used to place a call on hold.SP-PHONE (Speakerphone): Used forthe hands-free operation.Flexible Outside (CO) Line Buttons:Used to make or receive an outside call.Pressing this button seizes an idleoutside line automatically. (Buttonassignment is required.)Also used as feature buttons. (Buttonassignment is required.)Message/Ringer Lamp: When youreceive a call, the lamp flashes red.When someone has left you a message,the lamp stays on red.TRANSFER: Used to transfer a call toanother party.REDIAL: Used to redial the last diallednumber.MESSAGE: Used to leave a messagewaiting indication or call back the partywho left the message waiting indication.FLASH/RECALL: Used to disconnectthe current call and make another callwithout hanging up.INTERCOM: Used to make or receiveintercom calls.AUTO ANS (Auto Answer)/MUTE:Used to receive an incoming call inhands-free mode or mute themicrophone/handset during aconversation.PROGRAM: Used to enter and exit thepersonal programming mode.AUTO DIAL/STORE: Used forSystem/Personal Speed Dialling orstoring programme changes.1514PSQX2966ZA KK0703TT0SettingRinger volumeWhile on-hook or receiving a callPress UP or DOWN.0 1PROGRAMWhile on-hookLCD ContrastPROGRAMAUTO DIALSTOREAUTO DIALSTORERing TonePROGRAM OR0 10 8Press Twice.AUTO DIALSTOREPROGRAM(CO)INTERCOM* The ring tone pattern of patterns 09 to 30 is the same as pattern 01.*1514— 6 —