Panasonic KX-TD7690 User Manual

Also see for KXTD7690 - BTS 2.4 GHZ WIRELESS: Brochure & specs User guide Operating instructions Operating instructions Operating instructions

42Troubleshooting for Portable StationProblem Description and SolutionThe PS does not work. • The battery is drained.→ Charge the battery fully. (See “Charging” on page 5.)• The PS has been cancelled or the PS has not been registered.→ Consult your dealer.• The power is OFF.→ Turn it ON. (See “Power On/Off” on page 7.)The PS does not ring. • Ringer volume is set to “VIBRATION ON/RINGER OFF”, “MEETINGMODE” or “VIBRATION OFF/RINGER OFF”.→ Set to ring by pressing . (See “Ringer Volume Adjustment” onpage 13.)You cannot make/receive a call.• The PS is out of range or the Cell Station (CS) is busy.→ Move closer to the CS or try again later.• The radio channel is busy or a radio communication erroroccurred.→ Try again later.You cannot dial. • The number which you dialled is restricted by the BusinessTelephone System.→ Consult your dealer.• The key lock mode is set.→ To cancel the mode, depress for about 2 seconds. (See “Lockingthe Keypads” on page 7.)• The radio channel is busy or a radio communication erroroccurred.→ Try again later.Noise is frequentlycaused.→ Set the PS and CS away from other electrical appliances.→ Move closer to the CS.“CS BUSY” is displayed. • The Cell Station is busy.→ Try again later.“NEED REPAIR 1(-3)” isdisplayed.→ Consult your dealer.“PS Not Connected” isdisplayed.• The called PS is out of range or the PS is power off.→ Wait until the called PS moves closer to the CS, and try again.“NO SERVICE” isdisplayed.• The PS is out of range.→ Move closer to the CS.MENUTroubleshooting