Panasonic KX-TD7690C Operating Instructions Manual

12Before Operating the PSKey MenuPress to display the key list. The key list can be edited to suit your needs. Below is adescription of each key and its default key number.F-CO Key ListPress the F-CO soft button or select “F-CO” from the key menu to display the flexible COkey list. Here you can access the 12 flexible CO keys.• You can change the key menu assignment. (See page 41.)• You can select a key directly by pressing the key number.• * When accessing the key list, an icon indicating the status of the INTERCOM willbe displayed, if active. See “Understanding the F-CO Key List” below for adescription of the icons. If the PS is out of range, or if the Cell Station (CS) isbusy, the PS cannot handle calls and “?” will be displayed.• To select a key, press its key number, or press to highlight the desired keythen press .KEYINTERCOM Used to make or receive intercom calls.*CONFERENCE Used to establish a multiple-party conversation.FLASH(RECALL)F-CODisconnects a current call, allowing you to makeanother call without hanging up.TRANSFER Used to transfer a call to another extension.Fwd/DND Both Used to set the Call Forwarding or Do Not Disturbfeatures.AUTO ANSWER Used to receive an incoming call in hands-free mode.HOLDUsed to show the F-CO key list.Places a call on hold.PAUSE21345678Inserts a dialling pause.Used to leave a message to the called party or callback the message sender.MESSAGEKey no.(default) Key DescriptionLoop-COCO01AccountExample:1 EXT101234Understanding the F-CO Key List(on): You are currently using this line.(flashing rapidly): You have an incoming call on this line.(flashing slowly): You have a call on hold on this line.(on): This line is in use by someone else.(flashing rapidly): Someone has an incoming call on this line.(flashing slowly): Someone has a call on hold on this line.(no icon): This line is idle.key numberF-CO