593.2 User Programming (Manager Programming)Date and Time Set 000NOTICEIt is assumed that you have read Section 3.1 “General Programming Instructions.” The use of the soft buttonsis discussed in the section, therefore we will not make any reference to them in the following instructions.At any time the soft buttons can be used in place of the overlay keys.Description Sets the current data and time.Selection • Day: 1 through 31• Month: Jan. through Dec.• Year: 00 through 99• Day of the week: SUN / MON / TUE / WED / THU / FRI / SAT• Hour: 00 through 12• Minute: 00 through 59• AM / PMDefault 1 Jan ’94 SAT 12:00 AMProgramming 1. Enter 000.Display: Day/Time Set2. Press NEXT.Display example: 1 Jan '94 SAT3. Enter the day.To change the current entry, press CLEAR and the new day.4. Press .5. Keep pressing SELECT until the desired month is displayed.6. Press .7. Enter the year.To change the current entry, press CLEAR and the new year.8. Press .9. Keep pressing SELECT until the desired day of the week is displayed.10. Press STORE.11. Press NEXT.Display example: 12:00 AM
