1-4 Operations1.2 Proprietary Telephone SettingsIf you use a Panasonic proprietary telephone, you can customize your telephone functions. Forexample, you can change the initial settings according to your needs or the button functions onyour telephone. To program, you need to switch your telephone to the programming mode.During the programming mode, your telephone is busy to outside callers. If you want to makea normal call operation, you must finish the programming mode.• This feature cannot be used with a single line telephone.• Be sure the handset is on the cradle and the SP-PHONE button is off.• To program, set the MEMORY switch on the proprietary telephone to “PROGRAM” orpress the PROGRAM button on the KX-T7300 series.When you enter the Station Programming mode, the display shows the following message asthe initial programming mode.The display also gives you helpful or stored data information related to the programmingsteps. You can also refer to the “Display Example” in the Appendix (Section 2.4).• After programming, return the MEMORY switch to the “SET” position or press thePROGRAM button on the KX-T7300 series.• If you move your desk and change the extension line, reset as desired. The setting will notremain in your telephone but will remain in the previous extension user’s memory.• During the programming mode, your extension is treated as a busy extension.PITS-PGM NO? →!!To exit the Programming ModeWhen storing dataAfter pressing the STORE button to store data, you may hear one of the following tones.— Confirmation tone (1 beep): storage is completed.— Confirmation tone (2 beeps): the data is the same as the last entry.— Alarm tone (3 beeps): the entry is not valid.PTSET PROGRAMMEMORYSet the MEMORY switch to “PROGRAM” on the KX-T7000 series.ORPress the PROGRAM button on the KX-T7300 series.Be sure the telephone is idle and on-hook.or PROGRAMPTSET PROGRAMMEMORYWhen the display shows the initial programming mode;Programming is completedand the normal call operationresumes.Set the MEMORY switch to “SET” on the KX-T7000 series.ORPress the PROGRAM button on the KX-T7300 series.or PROGRAMTo enter the Programming ModeTechnical Manuals Online! - http://www.tech-man.com
