Panasonic KX-TD816CE User Manual

Also see for KX-TD1232CE: User manual addendum Installation manual Installation manual Installation manual User manual addendum

Panasonic KX-TD816CE User Manual Manual pdf 22 page image

22C 3.2 DPT FeaturesD 3.2 DPT FeaturesDisplay Call InformationWhen you have a call with an outside party, you can see the duration of atelephone call, the meter, the phone charge on the display by pressing theFWD/DND button alternately.When you make a call with an outside party;• The display shows the telephone number that you are calling.When you receive a call from an outside party;• The display shows the duration of a telephone call.After receiving a signal of the telephone charge;• The display changes to the meter.CO01 : 000011. Press the FWD/DND button.• The display shows the charge.CO01 :00000.23KC2. Press the FWD/DND button again.• The display returns to the duration of a telephone call.Conditions• Whenever pressing the FWD/DND button, the display changes the duration of a telephonecall, the meter, the phone charge in circular way.• If you don’t set the pay-tone assignment to enable for CO line, your display doesn’t changeeven if you press the FWD/DND button.• You can change the order of the display, the meter and the charge through SystemProgramming.• Refer to the display examples of Section 7 in user manual for another display callinformation.• If the displayed characters exceed sixteen digits, “&” is shown at the right-hand edge.Programming References• Station Programming (Section 2.2 in this manual)Charge Fee Reference — New Rate Set• System Programming — Installation Manual[120] Charge Display Selection[423] Pay-Tone Assignment12FWD/DNDFWD/DNDTD816 TD12324 4DPT (72**)20 30 35 504 4