Panasonic KX-TD816E User Manual

Also see for KX-TD1232E: User manual addendum User manual Installation manual User manual Installation manual

Contents

52.2 Station ProgrammingPhantom Button (Assignment)Allows you to assign a Flexible (CO, DSS) button as the Phantom button.— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].1. Press the desired Flexible (CO, DSS) button which you wish toassign as the Phantom button.2. Dial 88.• The display shows:3. Dial the phantom extension number.• The display shows:(— xxxx: phantom extensionnumber)• To erase an incorrect entry, press the CLR (S2) button or theTRANSFER (CLEAR) button.(The TRANSFER button becomes the CLEAR button while in the programmingmode.)4. Press the STORE button.• The STORE indicator light turns on.• The display shows the initial programming mode.— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.Conditions• The phantom extension number must be assigned in program [130] “Phantom ExtensionNumber Assignment” before assigning the Phantom button.• A DSS button can be assigned as the Phantom button so that the operator can use it fortransferring a call.• If you assigned the Phantom button to one of the CO buttons (13 through 24) on your KX-T7230 telephone and change the telephone to a KX-T7235 model, you must re-program thesetting as the KX-T7235 telephone has only 12 CO buttons. If you do not change thesetting, the phantom extension call reaches the INTERCOM button.Programming References• System Programming — Installation Manual[130] Phantom Extension Number Assignment124 AUTO DIALSTORE3Phantom extension number8 8 EXT-CLREXT-xxxxCLR