Panasonic KX-TDA100 Installation Manual

Also see for HYBRID IP-PBX KX-TDA100: User guide User guide Technical information Technical information Features guide

Contents

Panasonic KX-TDA100 Installation Manual Manual pdf 56 page image

2.2 Installation of the Hybrid IP-PBX56 Installation Manual2.2.8 Attaching a Ferrite CoreA ferrite core must be attached when:• an RJ45 connector is connected to IP-GW16 or IP-EXT16 cards, or• an Amphenol connector is connected to an extension card.Attaching to an RJ45 ConnectorFor IP-GW16/IP-EXT16 CardsWrap the cable once around the ferrite core, then close the case of the ferrite core. Attach the ferrite core 5cm (1-15/16 in) away from the connector. The ferrite core is included with the card.Attaching to an Amphenol ConnectorFor Extension CardsPass the cable through the ferrite core, then close the case of the ferrite core. Attach the ferrite core 3 cm(1-3/16 in) away from the connector. The ferrite core is included with the card.5 cm(1-15/16 in)3 cm(1-3/16 in)