5.19 [3-7-1] VM(DPT) Group—System SettingsA Panasonic Voice Processing System (VPS) with DPT Integration can be connected to DPT ports of the PBX.The DPT ports that are connected to the VPS are called a VM (DPT) Group.With the KX-TDA30, a maximum of 1 VM (DPT) Group can be programmed; with the KX-TDA100/KX-TDA200, 2 VM (DPT) Groups can be programmed; and with the KX-TDA600, 8 VM (DPT) groups can beprogrammed.Call Waiting on VM GroupEnables the queuing of calls when all extension ports of the VM (DPT) group are busy. (Call Waiting tone isnot sent to any VM port.)Value RangeDisable, EnableMaintenance Console Location5.19 [3-7-1] VM(DPT) Group—System SettingsProgramming Manual References3.5 [1-1] Slot—Port Property - Extension PortFeature Guide References1.2.2.4 Queuing Feature1.24.1 Voice Mail (VM) GroupIntercept to MailboxEnables the PBX to send the mailbox number of the called extension to the VPS when a call is redirected tothe VM (DPT) group by Intercept Routing. When the VPS receives the mailbox number, the VPS answers thecall with the appropriate mailbox.Value RangeDisable, EnableMaintenance Console Location5.19 [3-7-1] VM(DPT) Group—System SettingsProgramming Manual References3.5 [1-1] Slot—Port Property - Extension Port6.1 [4-1-1] Wired Extension—Extension Settings—Intercept Destination— Intercept Destination—Whencalled party does not answer—Day, Lunch, Break, Night6.10 [4-2-1] Portable Station—Extension Settings—Intercept Destination— Intercept Destination—Whencalled party does not answer—Day, Lunch, Break, NightPC Programming Manual 5395.19 [3-7-1] VM(DPT) Group—System Settings
