Panasonic KX-TDA100D Installation Manual

Also see for KX-TDA100D: Programming manual User manual Features guide Features guide Programming manual

Contents

Panasonic KX-TDA100D Installation Manual Manual pdf 22 page image

1.3.2 CharacteristicsTerminal Equipment Loop Limit • PT: KX-DT300/KX-T7600 series DPT: 90 W• SLT: 600 W including set• Doorphone: 20 W• CS: 130 W; PT-interface CS: 65 WMinimum Leakage Resistance 15 000 W minimumMaximum Number of ExtensionInstruments per Line1. for PT or SLT2. by Digital eXtra Device Port connection of 2 DPTsRing Voltage 65 Vrms*1 at 20 Hz/25 Hz depending on the Ringing LoadTrunk Loop Limit 1600 W maximumHookswitch Flash/Recall TimingRange24 ms to 2032 msBRI Cards Internal ISDN Mode Supply Voltage: 40 VPower Supply (BRI4): 4.5 W per 1 line, 9 W per 4 linesPower Supply (BRI8): 4.5 W per 1 line, 9 W per 8 linesPower Supply Method: Phantom Power SupplyDoor Opener Current Limit 24 V DC/30 V AC, 1 A maximumExternal Relay Current Limit 24 V DC/30 V AC, 1 A maximumExternal Sensor Current Limit Power to the external sensor is provided from the EIO4 card and mustbe grounded through the EIO4 card. For the connection diagram, referto "2.6.4 EIO4 Card (KX-TDA0164)". The PBX detects input from thesensor when the signal is under 100 W.Paging Terminal Impedance 600 WMOH (Music on Hold) TerminalImpedance10 000 W*1 KX-TDA100DML: 75 Vrms22 Installation Manual1.3.2 Characteristics