Panasonic KX-TDA15 Getting Started

Also see for KX-TDA15: User manual Features guide User manual Pt programming manual User manual

Contents

Panasonic KX-TDA15 Getting Started Manual pdf 23 page image

4.2 Installing the KX-TDA30 Maintenance ConsoleGetting Started 234.2 Installing the KX-TDA30 Maintenance ConsoleFor the system requirements of the PC (e.g., operating system, hardware specifications), refer to"3.3.1 Installing and Starting the KX-TDA30 Maintenance Console" in the Installation Manual.Notes• Make sure to install and use the latest version of the KX-TDA30 Maintenance Console.• To connect the PC to the Hybrid IP-PBX via USB, the KX-TDA USB driver must be installed.Follow the instructions of the wizard to install the KX-TDA USB driver. When the Hybrid IP-PBX is first connected to the PC via USB, you may be asked to select the appropriate USBdriver. Browse for and select the KX-TDA USB driver that was installed previously.• The contents and design of the software are subject to change without notice.• Screen shots reprinted with permission from Microsoft Corporation.4.3 Programming the Hybrid IP-PBXStarting the KX-TDA30 Maintenance Console and Assigning the BasicItems (Quick Setup)When you start the KX-TDA30 Maintenance Console with the Installer Level Programmer Code andconnect to the Hybrid IP-PBX for the first time after initialisation (with the factory default setting),Quick Setup will launch automatically. During Quick Setup, you will set up the basic items. For detailsabout the basic items, refer to "2.3.4 Quick Setup" in the Feature Guide.1. Copy the setup file of the KX-TDA30 MaintenanceConsole to your PC. (Its icon is shown here, on the left.)2. Double-click the setup file to run the installer.3. Follow the on-screen instructions provided by theinstallation wizard.1. Connect the PC to the Hybrid IP-PBX with aUSB cable or RS-232C.2. Start the KX-TDA30 Maintenance Consolefrom the Start menu.3. "Information before programming" appears.a. Carefully read this important additionalinformation, which includes updates to thisand other manuals.b. Click OK to close this window.4. a. Enter the Installer Level Programmer Code(default: INSTALLER).b. Click OK.