Panasonic KX-TDA15 Installation Manual

Also see for KX-TDA15: User manual Features guide User manual Pt programming manual User manual

Contents

Panasonic KX-TDA15 Installation Manual Manual pdf 148 page image

4.1 Troubleshooting148 Installation Manual4.1 Troubleshooting4.1.1 InstallationPROBLEM PROBABLE CAUSE SOLUTIONExtension does not operate. Bad extension card. • Exchange the card for a known workingone.Bad connection between theHybrid IP-PBX and telephone.• Take the telephone and plug it into thesame extension port using a shorttelephone cord. If the telephone works,then the connection between the HybridIP-PBX and the telephone must berepaired.A telephone with an A-A1 relayis connected.• Use a 2-wire cord.• Set the A-A1 relay switch of thetelephone to the "OUT" or "OFF"position.Bad telephone. • Take the telephone and plug it intoanother extension port that is working.If the telephone does not work, replacethe telephone.The Hybrid IP-PBX does notoperate properly.• Press the Reset Button (refer to "4.1.4Using the Reset Button").• Turn off the power switch, and then turnit back on.• Turn off the power switch, and thenunplug the Hybrid IP-PBX. After 5minutes, plug the Hybrid IP-PBX backin, and turn the power switch back on.Noise on external paging. Induced noise on the wirebetween the Hybrid IP-PBX andthe amplifier.• Use a shielded cable as the connectionwire between the Hybrid IP-PBX andamplifier. A short shielded cable isrecommended.Distorted external music. Excessive input level fromexternal music source.• Decrease the output level of theexternal music source by using thevolume control on the music source.Alternate Calling—Ring/Voiceand Live Call Screening (LCS)do not function as set when usinga Wireless Phone (KX-T7880/KX-T7885/KX-TD7894/KX-TD7895).Voice-calling mode and Hands-free mode with LCS are notavailable with Wireless Phones.• Switch the calling mode to ring-calling.• Set the LCS mode to "Private".The ALARM indicator on thefront of the cabinet turns on red.A major system error occurs inthe Hybrid IP-PBX.• See the error log using the KX-TDA30Maintenance Console (refer to "4.1.5Troubleshooting by Error Log").