Panasonic KX-TDA15 Installation Manual
Also see for KX-TDA15: User manualFeatures guideUser manualPt programming manualUser manual
                                                                                                                                                                | |
Contents
| 
2.7 Connection of DECT Portable StationsInstallation Manual 872.7.2 Procedure OverviewWhen connecting the wireless system, use extreme care to conduct a site survey. Site surveys can beconducted using the KX-TCA255 or KX-TD7590 PS. Inadvertent site survey can result in poor service area,frequent noise, and disconnection of calls.1. Investigate the installation siteRefer to "2.7.3 Site Planning".a. Obtain the map of the CS installation site.b. Consider the service area demanded by the user on the map.c. Plan the locations of each CS, taking account of distance, building materials and etc.2. Prepare for site surveyRefer to "2.7.4 Before Site Survey".a. Check and assign the CS ID number to the PS.b. Assign a channel number to each CS by setting the DIP switches on the back of the CS.c. Supply electricity to each CS using an AC adaptor or a battery box.d. Install each CS temporarily as planned.Notes• Install at least 2 m above the floor.• Keep the antennas in the upright position.3. Conduct the site surveyRefer to "2.7.5 Site Survey Using the KX-TCA255/KX-TD7590".a. Test the radio signal strength using the PS.Confirm that the radio signal strength level is "12" near the CS.Using the KX-TCA255Using the KX-TD7590b. By walking away from the CS with the PS, check the radio signal strength. The radio signal strengthweakens as you walk away from the CS.c. Map the CS coverage area at radio signal strength levels "3" and "8".d. Make sure that adjacent CS coverage areas overlap where the radio signal strength level is "8" byat least 5 m.Display example:RADIO STRENGTH<<< MEASURING >>> RADIO STRENGTHCH0 SLOT:06 SYNCL:12 0000/0100CS-ID:9005301234Press 1, 9, and POWERfor more than 2 seconds.1 99 00 to 9Channel No.To surveyspecific channelDisplay example:RADIO STRENGTH<<< MEASURING >>> CH0 SLOT:06 SYNCL:12 0000/0100CS-ID:9005301234Press 1, 9, and POWERfor more than 5 seconds.1 99 00 to 9Channel No.To surveyspecific channel |
Related manuals for Panasonic KX-TDA15
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine