To select the specified outside linePT andPT/PSOff-hook. Talk.Press S-CO.(S-CO)Dial outside phonenumber.outsidephone no.• Each of the S-CO button or G-CO button light shows the current status as follows:Off: The line is idle.Red on: The line is in use.• You may be restricted from making a call to the specified outside party. To make a call, referto "1.2.7 Calling without Restrictions".• To confirm number before dialling, you can enter a phone number and confirm it on thedisplay and then go off-hook. (Predialling)• Call Charge ReferenceYou can confirm your total call charges by pressing the Call Charge Reference button.• To make a call to another party without going on-hook, press the FLASH/RECALL button.It will re-access the outside line and provide external dial tone. Pressing the Terminate buttonwill provide intercom dial tone. You can dial the new phone number without going on/off-hook.• Hands-free OperationYou can make an outside call and have a conversation in hands-free mode using theSP-PHONE button.Customising Your Phone• 3.1.2 Settings on the Programming Mode—Preferred Line Assignment—Outgoing Selectthe seized line when going off-hook.• 3.1.3 Customising the ButtonsCreate or edit a Loop-CO (L-CO) button, a Group-CO (G-CO) button, a Single-CO (S-CO)button, a Terminate button or a Call Charge Reference button.Making a Call to a Private Network (TIE Line Access)You can access extensions connected to other PBXs in a private network.To callPT/SLT/PSOff-hook. Talk.private phone no.7Dial extension number orenter 7 and then dial private phone number.ORextension no. **User Manual 311.2.1 Basic Calling
