Panasonic KX-TDA30 Installation Manual

Also see for KX-TDA30: Features guide Operator user manual User manual User manual Features guide

Contents

Panasonic KX-TDA30 Installation Manual Manual pdf 34 page image

2.1 Before Installation2.1.1 Before InstallationPlease read the following notes concerning installation and connection before installing the PBX and terminalequipment.Be sure to comply with all applicable laws, regulations, and guidelines.Safety Installation InstructionsWhen installing telephone wiring, basic safety precautions should always be followed to reduce the risk of fire,electric shock and injury to persons, including the following:1. Never install telephone wiring during a lightning storm.2. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.3. Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected atthe network interface.4. Use caution when installing or modifying telephone lines.Installation PrecautionsThis PBX is designed for wall mounting only, and should be installed in a location where it is accessible forinspections and maintenance.To prevent malfunction, noise, or discolouration, avoid installing the system in the following locations:1. In direct sunlight and hot, cold, or humid places. (Temperature range: 0 °C to 40 °C)2. Areas where sulfuric gases may be present, such as near thermal springs.3. Areas where shocks or vibrations are frequent or strong.4. High-dust areas, or places the system may come into contact with water or oil.5. Near devices that generate high frequencies, such as sewing machines or electric welders.6. On or near computers, telexes, or other office equipment, as well as microwave ovens or air conditioners.(It is preferable not to install the system in the same room as the above equipment.)7. Within 1.8 m of radios and televisions. (Both the PBX and PTs should be at least 1.8 m away from suchdevices).8. Locations where other objects will obstruct the area around the PBX. Be especially careful to leave at least20 cm of space above and 10 cm to the sides of the PBX for ventilation.9. Do not stack up the optional service cards. To avoid damage to the optional service cards, always use theextension bolts.Wiring PrecautionsBe sure to follow these instructions when wiring the unit:1. Do not run unshielded telephone cables near AC power cables, computer cables, AC power sources, etc.When running cables near other noise-generating devices or cables, use shielded telephone cables orshield the telephone cables with metal tubing.2. If cables are run on the floor, use protectors to prevent the cables from being stepped on. Avoid runningcables under carpets.3. Avoid using the same AC outlet for computers, telexes, and other office equipment, as noise generated bysuch equipment may hamper system performance or interrupt the system.4. Use 2-pair telephone cables when connecting PTs.Use 1-pair telephone cables when connecting SLTs, data terminals, answering machines, computers,Voice Processing Systems, etc.34 Installation Manual2.1.1 Before Installation