Panasonic KX-TDA50 Installation Manual

Also see for KX-TDA50: User guide User guide Technical information Technical information Operating manual

Contents

Panasonic KX-TDA50 Installation Manual Manual pdf 85 page image

2.6 Connection of ExtensionsInstallation Manual 852.6.3 Digital EXtra Device Port (Digital XDP) ConnectionA DPT can be connected to another DPT on the Digital XDP connection. In addition, if the DPTis connected to a Super Hybrid Port, it can also have an SLT connected in Parallel mode orXDP mode.Notes• Both DPTs must be KX-T7600 series DPTs (excluding KX-T7640).• Parallel mode or XDP mode can be selected through system programming.• If XDP mode is enabled through system programming, parallel connection is notpossible. Refer to "1.10.9 Paralleled Telephone" and "2.1.1 Extension PortConfiguration" in the Feature Guide for further information.With KX-T7600 Series DPTUsing a Modular T-AdaptorTo DLC4/DLC8 cardTo a Super Hybrid Port(for connection of SLT)4-conductor wiring cordConnect pins "D1" and "D2".Slave DPTSLTMaster DPTModularT-Adaptor4-conductor wiring cordConnect pins "D1" and"D2".2-conductor wiring cordConnect pins "T" and "R".Slave DPTMaster DPTTO MAIN UNIT/ PABXTO TELTO MAIN UNIT/ PABXCable Maximum Distance26 AWG: Under 30 m (98 ft)24 AWG: Under 50 m (164 ft)22 AWG: Under 60 m (196 ft)CAT 5: Under 50 m (164 ft)Back View of DPTsTo DLC4/DLC8 cardTo a Super Hybrid Port(for connection of SLT)