12.6 [10-4] MiscellaneousThe Intercept Routing feature can activate when the destination of an incoming call is unavailable, or whenthere is no destination for the call, to reroute the call to an alternate destination.Intercept—Intercept Routing - DND (Destination sets DND.)Enables the Intercept Routing—DND feature to activate when the original destination is in DND mode.DefaultEnableValue RangeDisable (Busy Tone): Sends a busy tone to the caller. (However, a call through an LCOT/ELCOT or T1[LCOT/GCOT] card will ring at the original destination while the caller hears a ringback tone.)Enable: Redirects the call to the intercept destinationMaintenance Console Location12.6 [10-4] MiscellaneousProgramming Manual ReferencesNoneFeature Manual References4.1.9 DND (Do Not Disturb)9.1.11 Intercept RoutingIntercept—Routing to Operator - No Destination (Destination is notprogrammed.)Enables the Intercept Routing—No Destination feature to activate when there is no destination for the call.(The Intercept Routing—No Destination feature always works for calls through an LCOT/ELCOT or T1[LCOT/GCOT] card, even when this feature is disabled.)DefaultEnableValue RangeDisable (Reorder Tone): Sends a reorder tone to the callerEnable: Redirects the call to an operatorMaintenance Console Location12.6 [10-4] MiscellaneousProgramming Manual ReferencesNone758 PC Programming Manual Document Version 2010-1112.6 [10-4] Miscellaneous
