2.15 [9] Private Network632 PC Programming ManualEnhanced QSIG Call Information (Optional SD Card Required)Enables Network Message Waiting information to be sent from the PBX to which the VPS is attachedto extensions connected to other PBXs in the network.DefaultEnableValue RangeDisable, EnableMaintenance Console Location2.15.1 [9-1] TIE TableProgramming Manual ReferencesNoneFeature Manual References1.13.14 Private Network Features—Centralized Voice Mail2.15.2 [9-2] Network Data TransmissionSettings related to the transmission of extension BLF (Busy Line Field) data or Message Waitingnotifications over a network of PBXs can be programmed.Extension BLF data is used to show the status of a monitored extension attached to another PBX ona Network DSS (NDSS) button. Network Message Waiting notifications are used for the CentralizedVM feature, and a VPS can send notifications to extensions connected to any PBX in the network.Network BLF Data Transmission for Centralized Operator Feature—NetworkPBX IDSpecifies the Network ID of the PBX, for Network Direct Station Selection (NDSS). This parametermust be set in correspondence with the Network IDs assigned to other PBXs in the network.Network IDs 1-8 can only be assigned to one PBX each within a network. Assigning the sameNetwork ID to two PBXs will cause network data transmission problems.Changing this value in Interactive mode will automatically clear any NDSS Link Data.Default0Value Range0: The PBX retransmits BLF data sent by other PBXs.1: The PBX receives BLF data sent by other PBXs.2–8: The PBX transmits BLF data over the network.Maintenance Console Location2.15.2 [9-2] Network Data Transmission
