2.6 Help66 PC Programming Manual2.6 Help2.6.1 Frequently Asked Questions (FAQ)This section provides answers to some common questions about using the Maintenance Consolesoftware to program the PBX. The information is divided into the following topics:ConnectionTitle DescriptionConnection Connecting to the PBX using Maintenance Console.Maintenance Console Software Using the Maintenance Console software.Card Status Changing the status (INS/OUS) of cards.Portable Stations Setting up portable stations, including registration andderegistration.Numbering Changing the numbering plan for the PBX, or numbers of individualextensions or features.Saving Modified Data Safely saving PBX data edited with Maintenance Console.Setting Features Setting up individual features.Q The Maintenance Console cannot connect to the PBX via RS-232C cable.A • Is the cable firmly connected to both the PC and the PBX?• Is the serial port that the PC uses correctly specified?• Is the baud rate correct?The default setting, and a safe rate, is 19 200 bps.• Is the password correct?• Is the Maintenance Console not connected to the PBX by another connection method?Q The Maintenance Console cannot connect to the PBX via USB.A • Is the USB cable firmly connected to both the PC and the PBX?• Is the USB driver on the PC running?To confirm, open the Windows Device Manager, and look for "Panasonic KX-TDA USBMain Unit driver" in the USB Controllers section. If it is not present, re-install the USBdriver.• Is the password correct?• Is the Maintenance Console not connected to the PBX by another connection method?Q The Maintenance Console cannot connect to the PBX via LAN.A • Is the PC connected to the LAN?• Have the IP address and port number of the PBX been set correctly? For more details,see 2.7.27 [1-1] Slot—CTI-LINK Card Property (KX-TDA100/KX-TDA200/KX-TDA600only).• Is the password correct?• Is the Maintenance Console not connected to the PBX by another connection method?
