Panasonic KX-TDA5480 Programming Manual

Also see for KX-TDA5480: Installation manual Installation manual Installation manual Getting started Programming guide

Contents

2.2 Programming32 Programming Guide• Delete the desired gateway entry from the table at the bottom of the screen:a. Select the appropriate check box for the gateway entry you want to delete.NoteIf the gateway entry is registered to a DN2IP entry (see "2.2.7 AddressTranslation Table—DN2IP Entry"), no check box will be shown for the gatewayentry.b. Click DELETE.• Click LOGOUT to log out from the IP-GW4 Maintenance Utility (see "2.5.2 Log Out").4. Click ENTRY.A maximum of 512 gateway entries can be created.5. Click OK.You will see a confirmation screen.NoteIf your entry contains an invalid value, you will see an error screen. Click OK and tryagain with correct values.6. Confirm your entry and click OK.To return to the previous screen, click CANCEL.Parameter DescriptionsGW EntryThe parameters indicated with "*" must be changed while the VoIP Gateway Card is in the "STOP"status (see "2.3.1 Status Control"). The changes do not have to be followed by a reboot to becomeeffective.The parameters below are used to create gateway entries for both local and remote cards on thenetwork, as a preliminary step to programming the address translation table (DN2IP).For a programming example, refer to "4.2.5 Programming the Address Translation Table" of the VoIPGateway Card Getting Started.NoteIf you are using a gatekeeper, create the gateway entry only for the local card.Parameter & Description Default Value Range* GW No.Specifies the number for the gateway entry to becreated.When changing the current settings of an existinggateway entry, first delete the gateway entry and thenre-create with new values.0 0 to 511* CommentSpecifies the comment for the gateway entry.No default Max. 16 characters