PC Programming Manual References5.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous— VIP Call Mode9.1.9 Idle Extension HuntingDescriptionIf a called extension is busy or in DND mode, Idle Extension Hunting redirects the incoming call to an idlemember of the same idle extension hunting group, which can be programmed through system programming.Idle extensions are automatically searched according to a preprogrammed hunting type.This feature is also known as Station Hunting.Type DescriptionCircular Hunting An idle extension is searched for in the order specified in the idleextension hunting group in a circular way.Extn.Incoming callBusyExtn. Extn. Extn.Assignment orderTerminated Hunting An idle extension is searched for in the order specified in the idleextension hunting group until reaching the last assigned extension.Extn.Incoming callBusyExtn. Extn. Extn.LastAssignment orderConditions• Idle Extension Hunting applies to:Intercom, CO line, and doorphone calls to a single destination.• An extension user can belong to only one idle extension hunting group.• If all the searched extensions are busy:The PBX redirects the call to an overflow destination which can be assigned for each idle extension huntinggroup and each time mode (day/lunch/break/night) (® 17.1.5 Time Service).[Available Destination]Destination AvailabilityWired Extension (PT/SLT/SIP Extension/T1-OPX) üPS üICD Group üPS Ring Group ü156 Feature Manual Document Version 2009-129.1.9 Idle Extension Hunting
