• * The status will be as follows:Ready ® Not ReadyNot Ready ® ReadyWrap-up ® Not Ready• The Log-in/Log-out of a specified group button light shows the current status as follows:Off: Log-in modeRed on: Log-out mode• The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready mode.The Wrap-up button light shows the current status as follows:Off: Ready modeRed on: Not Ready modeFlashing red: Wrap-up mode• In Wrap-up mode/Not Ready mode, your extension does not receive calls through any group,even if it belongs to multiple groups.• The last remaining logged-in extension may not be allowed to log out, depending on systemprogramming.• The Supervisor extension can control the Log-in/Log-out status of other extensions.For more information, refer to "1.3.39 ICD Group Features—Log-in/Log-out Monitor andRemote Control".• For information about other ICD group features, refer to "1.3.35 ICD GROUP FEATURES".Customizing Your Phone• 3.1.4 Customizing the ButtonsCreate or edit a Log-in/Log-out button, a Log-in/Log-out of a specified group button or aWrap-up button.1.3.39 ICD Group Features—Log-in/Log-out Monitor and RemoteControlAn extension assigned as a supervisor (supervisor extension) can monitor the Log-in/Log-outstatus of incoming call distribution (ICD) group members with the lights of corresponding DSSbuttons. The supervisor extension can change the Log-in/Log-out status of an extension bypressing the corresponding DSS button.To perform this operation, the supervisor has to enter incoming call queue monitoring modefirst.Document Version 2008-10 Operating Manual 951.3.39 ICD Group Features—Log-in/Log-out Monitor and Remote Control
