Panasonic KX-TDE100 Pt Programming Manual

Also see for KX-TDE100: Specifications Networking guide User manual User manual Technical information

Contents

Panasonic KX-TDE100 Pt Programming Manual Manual pdf 16 page image

ProgrammingNumber Programming Group Title Description[3XX] TRS/ARS Programming TRS and Automatic Route Selection (ARS)programming[4XX] CO Line Programming CO line and trunk group settings[5XX] COS Programming Class of Service parameters[6XX] Extension Programming Extension feature settings[7XX] Resource/InterfaceProgrammingPBX interface and external device settings[8XX] SMDR & MaintenanceProgrammingStation Message Detail Recording (SMDR) andmaintenance feature settings[9XX]Card Programming Used to display the cards currently installed in thePBX, or to delete a card from system programmingbefore physically removing it.2.1.2 Maximum ValuesThroughout this manual, maximum entry values are shown for each programming item, as shown in theexample below.These values vary by PBX modelDisable/EnableSELECT[351] Carrier Table No. Trunk Group No. ENDENTER ENTERSELECTKX-TDE100: 01–10KX-TDE200: 01–10KX-TDE600: 01–48KX-TDE100: 01–64KX-TDE200: 01–64KX-TDE600: 01–96However, please note that slot and port entry values are not listed within each programming item. These valuesvary depending on the model of PBX and the card type installed, as shown below.Available Slot Entry ValuesKX-TDE100/KX-TDE200PBX Model Free Slot Number Supported CardsKX-TDE100 01–06All cardsKX-TDE200 01–11Enter slot numbers as two-digit numbers (e.g. "04" for slot 4).16 PT Programming Manual Document Version 2009-122.1.2 Maximum Values