Panasonic KX-TES824 Getting Started

Also see for KX-TEM824: Programming manual User manual User manual Features guide Installation manual

Panasonic KX-TES824 Getting Started Manual pdf 15 page image

Getting Started 152.6 Wall MountingThe PBX is designed for wall mounting only. The wall where the PBX is to be mounted must be ableto support the weight of the PBX. When wall mounting the main unit, use either the included screws,or screws of the same size.2.6.1 Mounting on a Wooden WallThe included screws may be used when mounting the main unit on a wooden wall.1. Place the template (found on the last page of this manual) on the wall to mark the 3 screwpositions.2. Fit the washers on the screws, and drive the screws into the wall.3. Affix the PBX to the screw heads.Notes• Do not block the openings of the cabinet. Leave at least 20 cm of space above and 10 cmto the sides of the PBX for ventilation.• Make sure that the wall behind the cabinet is flat and free of obstacles, so that the openingson the back of the cabinet will not be blocked.• Be careful not to drop the cabinet.TemplateWasherDrive the screwto this point.