Panasonic KX-TES824 Installation Manual

Also see for KX-TEM824: Programming manual User manual User manual Features guide Getting started

Contents

Panasonic KX-TES824 Installation Manual Manual pdf 78 page image

3.2 Connection78 Installation Manual3.2.3 Accessing PBX via Internal ModemWhen the mode of the PBX outside (CO) line that will be accessed is 'MODEM':1. For Dial Number, enter the telephone number assigned to the internal modem of the PBX.2. Select Auto (Tone) or Auto (Pulse) for Dial Type.3. Click OK.4. Click OK. The PC will connect to the PBX.When the mode of the PBX outside (CO) line that will be accessed is 'DISA':1. For Dial Number, enter the telephone number assigned to the internal modem of the PBX,several pause symbols (',') and the Remote Maintenance Feature Number (for example:01234567,,,,,729).2. Select Auto (Tone) for Dial Type.3. Click OK.4. Click OK. The PC will connect to the PBX.Notes• The number of pause symbols to be inserted differs depending on the PC modem used.• Auto (Pulse) Dial Type cannot be used.When the mode of the PBX outside (CO) line that will be accessed is 'Normal':1. For Dial Number, enter the pause symbol (',').2. Select Manual for Dial Type.3. Click Initialise.4. Click OK.5. Click OK.6. Dial the telephone number assigned to the outside (CO) line from a telephone connected inparallel with the PC.1. Start the KX-TE Maintenance Console softwarefrom the start menu on your PC. (Start → Programs→ KX-TE Maintenance Console)2. Type the Installer Level Programmer Code that wasset during the KX-TE Maintenance Consoleinstallation.3. Click the check box to connect to the PBX. Optionswill appear as shown here, on the left.4. Type the System Password. (default: 1234)5. Select Modem, and click Setup.