Panasonic KX-TG1032 Installation Manual

Also see for KX-TG1032: Operating instructions Quick guide Quick guide

Contents

Panasonic KX-TG1032 Installation Manual Manual pdf 4 page image

4 For assistance, please visit http://www.panasonic.com/helpPanasonic battery performanceNote:L The handset can be left on thecharger without any ill effect on thebatteries.L The battery level may not bedisplayed correctly or the entiredisplay may go blank after youreplace the batteries. In this case,place the handset on the charger andlet charge for 7 hours.RegistrationRegister the handset to a KX-TG1032/KX-TG1033/KX-TG1034/KX-TG1035base unit.1 Base unit:Press and hold {LOCATOR} untilthe registration tone sounds.L If all registered handsets startringing, press {LOCATOR} tostop, then repeat this step.L After the base unit beeps, the restof the procedure must becompleted within 1 minute and 30seconds.2 Handset:Press {OK}, then wait until a beepsounds and w stops flashing.Changing the displaylanguage1 {MENU}2 {V}/{^}: “Handset settings” i{OK}3 {V}/{^}: “Display settings” i{OK}4 {V}/{^}: “Change language” i{OK}5 {V}/{^}: Select the desired setting.6 {OK} i {OFF}Belt clipYou can hang the handset on your beltor pocket using the included belt clip.To attach the belt clipTo remove the belt clipWhile pressing the top of the clip(A),pull the right edge in the direction of thearrow (B).Operation Operating timeWhile in use(talking)Up to 17 hoursWhile not in use(standby)Up to 7.5 daysA B