Panasonic KX-TG1311NZ Operating Instructions Manual

Contents

Useful Telephone Settings16Guide to base unit settingsTo customise the base unit (general approach):1 {j/OK}2 Press {v} or {e} to select “SETTING BS”. i {>}L “INPUT CODE” is displayed.3 Enter the desired code number. Follow the instructions in the “Feature”column of the chart.L To exit the operation, press {ih}.Code No. Feature (default setting){0} Reset base unit to its default settings. *1− Enter base unit PIN (default: “0000”).*2 i {>}{3} Recall/flash time (600 ms)*3− Enter base unit PIN (default: “0000”).*2 i {2} i{1}− Select the desired setting by pressing {1} for 100 msor {2} for 600 ms. i {>}{5} Change base unit PIN (“0000”). *4− Enter the current 4-digit base unit PIN. *2− Enter the new 4-digit base unit PIN.− Enter the new 4-digit base unit PIN again.{6} Call restriction *5■ Setting call restriction− Enter base unit PIN (default: “0000”). *2 i Enterthe desired handset number by pressing theappropriate dial key.L The selected handset number flashes on thedisplay.− {>}− Enter the phone number to be restricted (8 digitsmax.).L To select a different memory location, press {>}and enter a number.− {>}■ Turning on/off call restriction− Enter base unit PIN (default: “0000”). *2L Handset number is displayed. A flashing numberindicates call restriction is on; a non-flashingnumber indicates call restriction is off.− Enter the desired handset number by pressing theappropriate dial key to turn on/off. i {>} 2 timesEmergency number (“111”, “911”, “999”)*6− Enter base unit PIN (default: “0000”). *2 i {*}■ Storing:− Enter the emergency number (8 digits max.).L To select a different memory location, press{>} and enter a number.− {>}■ Editing:Press {>} to display the desired number. i {C}i Enter the new emergency number. i {>}Code No. Feature (default setting)TG1311_1312_1313NZ(e).book Page 16 Tuesday, September 16, 2008 4:28 PM