Panasonic KX-TG1611HG Operating Instructions Manual

Panasonic KX-TG1611HG Operating Instructions Manual Manual pdf 13 page image

Making/Answering Calls13Making calls1 Lift the handset and dial the phone number.L To correct a digit, press {C}.2 {C}3 When you finish talking, press {ic} or placethe handset on the base unit or charger.Adjusting the receiver volumePress {^} or {V} repeatedly while talking.Making a call using the redial listThe last 10 phone numbers dialled are stored in theredial list (each 24 digits max.).1 {>} (R)2 {r}: Select the desired phone number.L When the number matches a phonenumber stored in the phonebook, thestored name in the phonebook isdisplayed.3 {C}Editing/erasing/storing numbers in theredial list1 {>} (R)2 {r}: Select the desired phone number. s{j/OK}3 Proceed with the desired operation.■ Editing a number before calling:{r}: “Szerk. & Hív” s {j/OK} sPress {<} or {>} to move the cursor. sEdit the number. s {C}■ Erasing a number:{r}: Select “Törlés” or “Mind törli”.s {j/OK} 2 times s {ic}■ Storing a number to the phonebook:{r}: “Számot ment” s {j/OK} s Tostore the name, continue from step 3,„Adding entries”, 15. oldal.Megjegyzés:L When editing:– To erase a number, place the cursor to theright of where you want to erase the number,then press {C}.– To insert a number, place the cursor to theright of where you want to insert the number,then press the appropriate dial key.Pause (for PBX/long distance serviceusers)A pause is sometimes required when making callsusing a PBX or long distance service. When storinga calling card access number and/or PIN in thephonebook, a pause is also needed (15. oldal).Példa: If you need to dial the line access number“0” when making outside calls with a PBX:1 ) s {P}2 Dial the phone number. s {C}Megjegyzés:L A 3 second pause is inserted each time {P} ispressed. Repeat as needed to create longerpauses.Answering calls1 Lift the handset and press {C} when the unitrings.L You can also answer the call by pressingany dial key from ) to 9, *, or (. (Anykey answer feature)2 When you finish talking, press {ic} or placethe handset on the base unit or charger.Auto talkYou can answer calls simply by lifting the handsetoff the base unit or charger. You do not need topress {C}. To turn this feature on, see 17. oldal.Adjusting the handset ringer volume■ While the handset is ringing for an incomingcall:Press {^} or {V} repeatedly to select the desiredvolume.■ Programming the volume beforehand:1 {j/OK}2 {r}: “CsengőBeáll.” s {j/OK}3 {r}: “Hangerő” s {j/OK}4 {r}: Select the desired volume.5 {j/OK} s {ic}Useful features during a callMuteWhile mute is turned on, you can hear the otherparty, but the other party cannot hear you.TG161x_171xHG(e-hg).book Page 13 Monday, February 21, 2011 11:46 AM