Panasonic KX-TG1811 Operating Instructions Manual

Contents

15Useful Telephone Settings*1 Call bar feature prohibits making outside calls. When call bar is turned on, only emergencycalls can be made. To store emergency numbers, see page 16.*2 If you forget your PIN, see page 21.*3 Direct call feature allows you to dial a preset phone number simply by pressing {C}. Nodialling is necessary.*4 If you change the PIN, please write down your new PIN as the unit will not reveal the PINto you.*5 Auto talk feature allows you to answer calls simply by lifting the handset off the base unitor charger. You do not need to press {C}.Guide to base unit settingsTo customise the base unit:1 {j/OK}2 Press {e} or {v} to select “SETTING BS”. i {>}L “INPUT CODE” is displayed.3 Enter the desired code number. Follow the instructions in the “Feature” column of thechart.L To exit the operation, press {ih}.OTHER OPT HSPIN CHANGE Change handset PIN (“0000”). *4− Enter the current 4-digit handset PIN.*2− Enter the new 4-digit handset PIN.− Enter the new 4-digit handset PIN again.AUTO TALK Auto talk on/off (“OFF”) *5RESET HS ————— Reset handset to its default settings.− Follow steps 1, 2, and 3.− Enter handset PIN (default: “0000”). *2− {v} i {>}Code No. Feature (Default setting){0} Reset base unit to its default settings. *1− Enter base unit PIN (default: “0000”).*2 i {>}{3} Recall time (100 ms)*3− Enter base unit PIN (default: “0000”).*2 i {2} i {1}− Select the desired setting by pressing {1} for 700 ms, {2} for 100 msor {3} for 90 ms. i {>}{5} Change base unit PIN (“0000”). *4− Enter the current 4-digit base unit PIN. *2− Enter the new 4-digit base unit PIN.− Enter the new 4-digit base unit PIN again.Handset settingsmenuSub-menu Feature (default setting)TG1811_1812_1813AL(e-e).book Page 15 Friday, May 12, 2006 2:25 PM