Panasonic KX-TG2215B Operating Instructions Manual

Also see for KX-TG2215B: Description

Contents

Panasonic KX-TG2215B Operating Instructions Manual Manual pdf 31 page image

31Basic OperationFor assistance, please call: 1-800-211-PANA(7262)The Caller ID Number Auto Edit FeatureThere are 3 patterns of phone number (a, b, and c, p. 30). This featureallows your phone to automatically edit an in-coming Caller ID numberinto one pattern you preferred, and display the Caller ID number with thatpattern on the handset automatically.After this feature is activated, Caller ID numbers coming from consideredarea codes (201, for example), from which the Caller ID numbers havebeen chosen to follow the desired pattern (7 digit pattern, for example),will be automatically edited from other patterns (11 digit pattern, forexample) into the same pattern you have previously selected (which is 7digit pattern, in the example).Up to 4 area codes are allowed for this feature for pattern a and b (p. 30).To activate this feature, you must 1) set this feature to on, and 2) makean out-going call from Caller List (p. 29) with a number which has one of 3patterns that you have edited with considered area code, and that youprefer to be followed by future Caller ID numbers, so that in the future allthe Caller ID numbers coming from the same area code will be displayedin the same pattern.The Caller ID number Auto Edit feature is preset to ON at factory.•If you fail to reach your destination when making the call, the phone number youdialed might have an incorrect pattern, please edit the phone number with anotherpattern (p. 30).For example, if you move to another area, you may need to turn thisfeature to OFF to erase previously edited area codes. Then, if still need,you may activate this feature again.Ringer patternHProgram--------------Talk switchingHCallerID editLCD contrastMake sure the unit is not being used and the handset is lifted off thebase unit.1. Press (FUNCTION).2. Scroll to “Program” by pressing Ö or Ñ andpress á.3. Scroll to “CallerID edit” by pressingÖ or Ñ.4. Press á.5. Select “On” or “Off” by pressing Ö or Ñ.6. Press á (Save key).•A beep sounds.•To exit the programming mode, press (OFF).•When the feature is set to OFF, the unit will still be able to display Caller ID, likeregular Caller ID telephone, but the in-coming Caller ID number will not be editedby pattern and by area codes.