Panasonic KX-TG2248S Operating Instructions Manual

Also see for KX-TG2248S - 2.4 GHz Digital Cordless Phone Answering System: Description Service manual

Contents

Panasonic KX-TG2248S Operating Instructions Manual Manual pdf 39 page image

Answering SystemFor assistance, please call: 1-800-211-PANA(7262) 39Automatic Answering OperationWhen the unit answers a call, a greeting message is played and the caller’smessage is recorded. When the handset is on the base unit, the Ringer indicator onthe handset will flash to indicate a message is being recorded.Setting the Unit to Answer CallsPress [ANSWER ON] to turn on the Answering System.• The indicator lights and the unit announces“Answer set” and current day and time. If “Set time”is heard, set the date and time (p. 12).• The unit will announce the remaining recordingtime if it is less than 3 minutes.• When the remaining recording time is 0, “ ”will be displayed on the base unit, ANSWER ONindicator will flash rapidly and the unit willannounce “Memory full”. You need to erase anyunnecessary messages before new messagescan be recorded (p. 43).• To turn the Answering System off, press[ANSWER ON] again. The indicator light goes outand “Answer off ” is heard.• The Answering System can be turned on remotelyusing any other phone (p. 47).• To turn the Answering System off, press [0] in step 3. “Answer off ” is heard.Monitoring incoming callsWhile a call is being recorded, you can monitor it through the base unit speaker.• To increase the speaker volume, press VOLUME [ ]. To decrease volume, pressVOLUME [ ].To answer the call, press [ ] or [ ]. The unit will stop recording.• The total recording time (including greeting message) is about 17 minutes. Ifmessages are recorded in noisy rooms, the time may be shortened by up to3 minutes.• A maximum of 64 messages (including greeting message) can be recorded.1 Press [MENU].2 Scroll to “Message play” by pressing [ ] or [ ], then press Select.3 Press [8] to turn on the Answering System.• “Answer set” is heard.4 Press [OFF].Base Unit[ANSWER ON] andIndicatorFULLHandset>>>>