PreparationFor assistance, please call: 1-800-211-PANA(7262) 15Programmable FunctionsTo turn the mode ON while talking, press (VE).• “ ” is displayed.• Each time you press (VE), the mode will change to ONor OFF.Talking Caller IDAfter subscribing to a Caller ID service, the handset will display a caller’s name andphone number (p. 27). Name and telephone number Caller ID service is required.This Talking Caller ID feature allows the unit to announce a displayed caller’s namethrough the handset and base unit speakers while a call is being received (p. 27).For example, when you receive a call from “SMITH, JOHN”, the unit will display“SMITH, JOHN” and announce “Call from SMITH, JOHN” repeatedly until you or theanswering system answer the call. The factory preset is ON.Auto TalkThe Auto Talk feature allows you to answer a call by lifting the handset off the baseunit without pressing [ ] or [ ]. To use this feature, turn the feature ON. Thefactory preset is OFF.• In order to view Caller ID information after you lift up the handset to answer a call,leave the Auto Talk feature OFF.1 Press [MENU].2 Scroll to “Talk Caller ID” by pressing [ ]or [ ], then press Select.3 Select “Off” or “On” by pressing [ ] or [ ].4 Press Save, then press [OFF].1 Press [MENU].2 Scroll to “Initial setting” by pressing [ ]or [ ], then press Select.3 Scroll to “Auto talk” by pressing [ ] or [ ],then press Select.4 Select “On” or “Off” by pressing [ ] or [ ].5 Press Save, then press [OFF].Talk 00-00-32(VE) HoldHandset>> Talk Caller IDExit Select>>>> Talk Caller ID:OnBack Save>>Handset>> Initial settingExit Select>>>>Auto talkBack Select>>>> Auto talk :OffBack Save>>