Panasonic KX-TG2267B Operating Instructions Manual

Also see for kx-tg2267 - Cordless Phone - Operation: Description

Contents

When a call is received, the unit rings and “Incoming call” and thecalled line are displayed. The called line status indication on the displayand the LINE indicator on the base unit flashes quickly. The line isautomatically selected when you answer the call. (To change the lineselection, see page 54.)If you subscribe to a Caller ID service, the calling party information will bedisplayed after the first ring (p. 28). In order to view the Caller IDinformation, please wait until the second ring to answer a call.Press .ORPress , and when the other party answers,talk into the microphone.•The called line status indication stops flashing.•You can also answer a call by pressing any dialingbutton (0) to (9), (*) or (#) (Any Key Talk).•You may answer a call by pressing the called line button instead of .•You can select the ringer volume while a call is being received. Press Ö or Ñwhile the handset is just ringing. To set to OFF, press and hold Ö.Auto TalkIf you set the Auto Talk feature to ON(p. 19), you can answer a call by lifting thehandset off the base unit without pressingor .•When the ringer volume is set to OFF, the selected line(s) will not ring (p. 20).27Basic OperationFor assistance, please call: 1-800-211-PANA(7262)Answering CallsMicrophoneBacklit LCD displayThe lighted handset display will stay on for a few seconds after pressing ahandset button, lifting the handset off the base unit, hanging up a call orleaving the programming mode.Lighted handset keypadThe handset dialing buttons will light when you press a button or lift thehandset off the base unit. They will flash when a call is received. Thelights will go out a few seconds after pressing a button, lifting the handsetoff the base unit, hanging up a call or leaving the programming mode.