Voice Mail Service34Setting Voice Mail (VM) Tone DetectionYour telephone company sends special signals (Voice mail tones) to the unit.Press [C] or [s] to listen to the dial tone. If you hear a series of dial tones followedby a continuous dial tone, this indicates that a new message was recorded. VoiceMail detection is preset at the factory to ON. Minutes after you hang up or after thephone stops ringing, your unit will seize the phone line and check if a message hasbeen recorded. If a new message was recorded at your telephone company,“Voice Mail” will be displayed on the handset.Turn off this programming when:— you do not subscribe to a voice mail service,— your telephone company does not send a series of tones, followed by acontinuous tone to indicate you have new voice mail, or— your phone is connected to a business or office telephone system (PBX).See below to turn this setting off.If you are not sure which setting is required, consult your local telephone companyor contact the Panasonic Customer Call Center.1 Press [MENU].2 Scroll to “Initial setting” by pressing [d]or [B], then press Select.3 Press Select at “Voice Mail”.4 Scroll to “VM tone detect” by pressing [d]or [B], then press Select.5 Select “Off” or “On” by pressing [d] or [B].6 Press Save, then press [OFF].HandsetInitial settingBack SelectK dB LVoice MailBack SelectK dB LVM tone detectBack SelectK dB LVM tone detect:OnBack SaveK dB L