Making CallsBasic OperationFor assistance, please call: 1-800-211-PANA(7262) 19To dial after confirming theentered numberTo adjust the receiver/speaker volume during aconversationThere are 3 volume levels for thereceiver and 6 volume levels for thespeaker.To increase volume, press [B].To decrease volume, press [d].• The display shows the current volumesetting.• If you try to increase/decreasevolume when it is at the maximum/minimum level, the handset will beep3 times.To redial the last numberdialedTo redial using the rediallist (Memory Redial)The last 5 phone numbers dialed arestored in the redial list.• To erase an item, scroll to the itemthen press Erase.• If “No items stored” is displayed,the list is empty.To put a call on holdTo return to the call, press [C]or [s].• If another phone is connected on thesame line (p. 8), you can also take thecall by lifting its handset.• If a call is kept on hold for 6 minutes,an alarm tone will start to sound andthe Ringer/Message Alert indicatorwill start to flash rapidly. After 4additional minutes on hold, the callwill be disconnected.1 Enter a phone number.• If you misdial, press Clear.Enter the correct number.• If a pause is required whendialing, press Pause whereneeded (p. 38).• To cancel, press [OFF].2 Press [C] or [s].3 To hang up, press [OFF] orplace the handset on the baseunit.Press [C] or [s], then press[REDIAL].3334444|Clear PauseK LEx. Receiver volume: HighSpeaker volume: Level 6VolumeLow High(VE) MuteK L1 Press [REDIAL].• The last number dialed isdisplayed.2 Scroll to the desired number bypressing [d] or [B].• You can also scroll down throughthe list by pressing [REDIAL].• To exit the list, press [OFF].3 Press [C] or [s].Press [HOLD] during aconversation.333-4444EraseK dBHoldRcvd Phonecalls bookK L